Highlander 4WD L4-2.4L (2AZ-FE) (2001)
/Page-958002.png)
11. REMOVE PARKING BRAKE PEDAL SUB-ASSY [46201/98-78]
a. Remove the nut, bolt and parking brake pedal from the bracket.
b. Remove the 2 bushes from the parking brake pedal.
12. REMOVE PARKING CABLE CLEVIS [46414/98-78]
a. Using snap ring pliers, remove the snap ring, pin and parking cable clevis.
13. REMOVE PARKING PEDAL PAD [46252/98-78]
14. INSTALL PARKING PEDAL PAD [46252/98-78]
15. INSTALL PARKING CABLE CLEVIS [46414/98-78]
a. Install the pin into the parking cable clevis and parking brake pedal.
b. Using snap ring pliers, install a new snap ring.
16. INSTALL PARKING BRAKE PEDAL SUB-ASSY [46201/98-78]
a. Apply the lithium soap base grycol grease on are new 2 bushes.
b. Install the 2 bushes to the parking brake pedal.
c. Install the parking brake pedal to the bracket with the bolt and nut.
Torque: 32 Nm (326 kgf-cm, 24 ft. lbs.)
17. INSTALL TENSION SPRING [46201B/98-78]
18. INSTALL PARKING BRAKE SWITCH ASSY [84550]
a. Install the parking brake switch assembly with the screw.