Highlander 4WD L4-2.4L (2AZ-FE) (2001)
/Page-361009.png)
c. Apply seal packing in the shape of bead (Diameter 3 - 4 mm (0.118 - 0.157 inch)) as shown in the illustration.
Seal packing: Part No. 08826-00080 or equivalent
d. Install the timing chain cover with the 14 bolts and 2 nuts.
Torque:
Bolt A 9.0 Nm (92 kgf-cm, 80 inch lbs.)
Bolt B 21 Nm (214 kgf-cm, 15 ft. lbs.)
Bolt C 43 Nm (438 kgf-cm, 32 ft. lbs.)
Nut 9.0 Nm (92 kgf-cm, 80 inch lbs.)
e. Install the stud bolt to the drive belt tensioner.
Torque: 10 Nm (1102 kgf-cm, 7 ft. lbs.)
41. INSTALL V-RIBBED BELT TENSIONER ASSY [16620 / 98-19]
a. Install the drive belt tensioner with the bolt and nut.
Torque: 60 Nm (607 kgf-cm, 44 ft. lbs.)