Highlander 4WD L4-2.4L (2AZ-FE) (2001)
Blower Motor: Service and Repair
BLOWER ASSEMBLY
OVERHAUL
1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
2. REMOVE AIR DUCT NO.1
a. Remove the screw, disengage the 3 claw fittings and remove the air duct No.2.
3. SEPARATE ECM
a. Remove the 2 nuts and disconnect the ECM.
4. REMOVE BLOWER ASSEMBLY
a. Disconnect the connector and clamp of the cooling unit motor W/fan sub-assembly.
b. Disconnect the connector of the recirculation damper servo.
c. Remove the 2 screws and bracket.
d. Remove the filter cover.