Highlander 4WD L4-2.4L (2AZ-FE) (2001)
/Page-1448001.png)
Door Switch: Testing and Inspection
FRONT DOOR COURTESY LAMP SWITCH ASSEMBLY
a. Inspect front door courtesy lamp switch continuity.
1. Check that the continuity exists between terminal 1 and body ground, when switch is operated.
Standard:
ON (When shaft is pressed): No continuity
OFF (When shaft is not pressed): Continuity
REAR DOOR COURTESY LAMP SWITCH ASSEMBLY
a. Inspect rear door courtesy lamp switch continuity.
1. Check that the continuity exists between terminal 1 and body ground, when switch is operated.
Standard:
ON (When shaft is pressed): No continuity
OFF (When shaft is not pressed): Continuity
BACK DOOR COURTESY LAMP SWITCH ASSEMBLY
a. Inspect back door courtesy lamp switch continuity.
1. Check that the continuity exists between terminal A-1 and A-2, when switch is operated.
Standard:
ON (When shaft is pressed): No continuity
OFF (When shaft is not pressed): Continuity