Highlander 4WD L4-2.4L (2AZ-FE) (2001)
b. Apply grease to the these parts, and its to the Starter housing.
c. Apply grease to the clutch gear.
d. Install the starter housing and clutch assembly with the 2 screws.
Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf)
17. INSTALL STARTER YOKE ASSEMBLY
a. Install a O-ring to the groove of the field frame.
b. Pull out the field frame together with the armature.
HINT: Align the protrusion of the field frame with the groove of the magnetic switch.
c. Install the field frame and armature assembly with the 2 through bolts.
Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf)
d. Connect the lead wire to the C terminal with the nut.
Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf)