Highlander 4WD L4-2.4L (2AZ-FE) (2001)
/Page-1068004.png)
h. Check the camber.
HINT:
-
Try to adjust the camber to the center of the specified value.
-
Adjusting value for the set bolts is 6' - 30' (0.1° - 0.5°).
If the camber is not within the specified value, using the table, estimate how much additional camber adjustment will be required, and select
the camber adjusting bolt.
NOTICE: Tighten the adjusting bolt with a washer and a new nut.
i.
Do the steps mentioned again. At step (b), replace 1 or 2 selected bolts.
HINT: When replacing the 2 bolts, replace 1 bolt for each time.