Highlander 4WD L4-2.4L (2AZ-FE) (2001)
9. SEPARATE FRONT STABILIZER LINK ASSY LH
a. Remove the nut and separate the stabilizer link assembly from the stabilizer bar.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.
10. SEPARATE FRONT STABILIZER LINK ASSY RH
HINT: Remove the RH side by the same procedures with LH side.
11. REMOVE FRONT STABILIZER BRACKET NO.1 LH
12. REMOVE FRONT STABILIZER BRACKET NO.1 RH
HINT: Remove the RH side by the same procedures with LH side.
13. SEPARATE RETURN TUBE ASSY
a. Using SST, separate the return tube assembly from the steering gear assembly
SST 09023-12700
14. SEPARATE PRESSURE FEED TUBE ASSY
a. Using SST, separate the pressure feed tube assembly from the steering gear assembly.
SST 09023-12700
b. Remove the nut and separate the pressure feed tube clamp.
15. REMOVE RACK & PINION POWER STEERING GEAR ASSY