Highlander 4WD V6-3.0L (1MZ-FE) (2003)
b. Remove the clip and disconnect the parking brake cable assy No. 1 from the parking brake pedal assy.
c. Remove the nut and parking brake cable assy No. 1 from the parking brake equalizer.
d. Turn up the floor carpet and remove the 2 bolts and parking brake cable assy No. 1 from the body.
7. INSTALL PARKING BRAKE CABLE ASSY. NO.1.
a. Install the parking brake cable assy. No.1 to the body with the 2 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
b. Connect the parking cable assy. No. 1 to the parking brake pedal assy and install the clip.