Highlander 4WD V6-3.0L (1MZ-FE) (2003)
![background image](/toyota/highlander_4wd/v6-3.0l_(1mz-fe)/Page-830004.png)
16. CHECK PARKING BRAKE INSTALLATION
a. Check that each part is installed properly.
NOTICE: There should be no oil or grease adhering to the friction surface of the shoe lining and disc.
17. INSTALL REAR DISC
18. ADJUST PARKING BRAKE SHOE CLEARANCE
a. Temporarily install the hub nuts.
b. Remove the hole plug, and turn the adjuster and expand the shoes until the disc locks.
c. Contract the shoe adjuster until the disc can rotate smoothly.
Standard: Return 8 notches
d. Check shoe is no brake drag.
e. Install the hole plug.
19. CONNECT REAR DISC BRAKE CALIPER ASSY LH
a. Install the rear disc brake caliper with the 2 bolts.
Torque: 47 Nm (480 kgf-cm, 35 ft. lbs.)
20. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
21. ADJUST PARKING BRAKE PEDAL TRAVEL