Highlander 4WD V6-3.0L (1MZ-FE) (2003)
c. Wind vinyl tape around the serrated part of the control valve.
d. Remove the dust cover from the control valve housing.
e. Remove the 2 bolts and control valve.
f.
Remove the gasket.
g. To prevent oil seal lip damage, wind vinyl tape around the serrated part of the control valve.
h. Using a plastic hammer, remove the control valve with oil seal from the control valve housing.
i.
Remove the oil seal from the control valve.
j.
Using a screwdriver, remove the 4 control valve springs.
NOTICE: Be careful not to damage the grooves for the spring.