Highlander 4WD V6-3.0L (1MZ-FE) (2003)
53. INSTALL REAR DIFFERENTIAL CASE BEARING
a. Using SST and a press, install the case bearing (RH) into the differential case.
SST 09636-20010
54. INSTALL REAR DIFFERENTIAL CASE BEARING
a. Using SST and a press, install the case bearing (LH) into the differential case.
SST 09636-20010
55. INSPECT RUNOUT OF DIFFERENTIAL RING GEAR
a. Install the differential case on the carrier, and install the 2 plate washers so that there is no play in the bearing.
b. Install the 2 bearing caps with the 4 bolts.
Torque: 79 Nm (800 kgf-cm, 58 ft. lbs.)
c. Using a dial indicator, measure the runout of the ring gear.
Maximum runout: 0.07 mm (0.0028 inch)
d. Remove the 2 bearing caps, 2 plate washers and differential carrier.
56. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Using SST and a press, install the front bearing (outer race) to the carrier.
SST 09950-60010 (09951-00620), 09950-70010 (09951-07150)