Highlander 4WD V6-3.0L (1MZ-FE) (2003)
/Page-701003.png)
SST 09527-17011, 09950-60010 (09951-00600), 09950-70010 (09951-07100)
20. INSTALL REAR AXLE SHAFT LH BEARING
a. Using SST and a press, install the new bearing to the rear axle carrier.
SST 09214-76011, 09527-17011
21. INSTALL REAR AXLE SHAFT LH SNAP RING
a. Using a snap ring expander, install the new snap ring.
22. INSTALL REAR AXLE SHAFT LH OIL SEAL
a. Using SST and a press, install the new oil seal (outer side) to the rear axle shaft.
SST 09502-12010, 09950-60020 (09951-00730), 09527-17011, 09950-70010 (09951-07100)
23. INSTALL PARKING BRAKE PLATE SUB-ASSY LH
a. Install the parking brake plate with the 4 nuts.
Torque: 72 Nm (730 kgf-cm, 53 ft. lbs.)