Highlander 4WD V6-3.0L (1MZ-FE) (2003)
13.
SEPARATE PARKING BRAKE CABLE ASSEMBLY NO. 3 (see page 33-17).
14.
REMOVE AXLE ASSEMBLY RR RH Remove the 2 bolts, nuts and the rear axle from shock absorber.
15.
REMOVE REAR AXLE SHAFT RH OIL SEAL. Using the SST below, remove the oil seal (inner side).
^
SST 09308-00010
NOTE:
If the oil seal comes off together with the rear axle shaft, remove the oil seal from the shaft.
16.
INSTALL REAR AXLE SHAFT RH OIL SEAL. Using the SST below, and a press, install the new oil seal (inner side) to the rear axle carrier.
^
SST 09608-10010