Highlander 4WD V6-3.3L (3MZ-FE) (2004)
(a) Using SST, connect the pressure feed tube assy to the steering link assy.
SST 09023-12700
Torque: 22 Nm (230 kgf-cm, 16 ft-lbf)
HINT:
-
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
-
This torque value is effective when SST is parallel to a torque wrench.
(b) Install the pressure feed tube assy clamp with the bolt.
Torque: 9.8 Nm (100 kgf-cm, 87 in.-lbf)
58. CONNECT RETURN TUBE ASSY
(a) Using SST, connect the return tube assy to the steering link assy.
SST 09023-12700
Torque: 22 Nm (230 kgf-cm, 16 ft-lbf)
HINT:
-
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
-
This torque value is effective when SST is parallel to a torque wrench.
(b) Install the tube clamp to the pressure feed tube assy.