Highlander 4WD V6-3.3L (3MZ-FE) (2004)
5. DISCONNECT TRANSMISSION CONTROL CABLE ASSY
a. Disconnect the floor shift transmission control cable assy end from the floor shift assy.
6. REMOVE FLOOR SHIFT ASSY
a. Disconnect the 3 connectors.
b. Remove the 4 nuts and dismount the floor shift assy from the vehicle.
7. REMOVE SHIFT LEVER KNOB SUB-ASSY
a. Releasing the lock by pressing the click, disconnect the indicator lamp wire connector from the shift lever plate.
b. Using a screwdriver, release the stopper of the connector.
c. Using a small screwdriver, disengage the locking lug of the terminals 2 and 6, and pull the terminals out from the rear.
d. Disconnect the 2 wire harnesses of the transmission control switch from the clamp.