Highlander 4WD V6-3.3L (3MZ-FE) (2004)
/Page-809004.png)
a. Using a screwdriver, release the stopper of the connector.
b. Using a small screwdriver, disengage the locking lug of the terminals 3 and 7, and pull the terminals out from the rear.
c. Remove the indicator lamp wire from the position indicator housing lower.
d. Remove the indicator lamp cap and indicator lamp bulb from the indicator lamp wire.
12. REMOVE SHIFT LOCK RELEASE BUTTON COVER
a. Using a small screwdriver, remove the shift lock release cover from the control position indicator plate.
13. REMOVE CONTROL POSITION INDICATOR PLATE
a. Using a screwdriver, release the 4 claws and remove the control position indicator plate from the position indicator housing lower.
14. REMOVE POSITION INDICATOR HOUSING LOWER
a. Remove the 4 screws, detach the position indicator housing lower from the shift lever plate.
