Highlander 4WD V6-3.3L (3MZ-FE) (2004)
Quarter Window Glass: Service and Repair
QUARTER WINDOW ASSEMBLY LH
REPLACEMENT
HINT:
-
Installation is in the reverse order of removal. But, the installation is indicated only when it has a point.
-
In the RH side, work in the same procedure as in the LH side.
1. REMOVE REAR SEAT ASSEMBLY LH
2. REMOVE REAR DOOR SCUFF PLATE LH
3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
4. REMOVE TONNEAU COVER ASSEMBLY (W/ TONNEAU COVER)
5. REMOVE DECK BOARD SUB-ASSEMBLY
6. REMOVE DECK BOARD SUB-ASSEMBLY NO.3
7. REMOVE LUGGAGE COMPARTMENT TRAY
8. REMOVE DECK SIDE TRIM BOX LH
9. REMOVE REAR FLOOR FINISH PLATE
10. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
11. REMOVE REAR COMBINATION LAMP SERVICE COVER LH
12. REMOVE DECK SIDE TRIM COVER LH
13. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
14. REMOVE QUARTER PILLAR GARNISH LH
15. REMOVE ROOF SIDE RAIL GARNISH SUB-ASSEMBLY LH
16. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH
17. REMOVE QUARTER WINDOW ASSEMBLY LH
a. Using a knife, cut off the moulding as shown in the illustration.
NOTE: Do not damage the body with the knife.
b. Disconnect the connector.