Highlander 4WD V6-3.3L (3MZ-FE) Hybrid (2007)
Seat Occupant Sensor: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer Scan Tool
Clear the DTCs
1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Clear the DTCs by following the prompts on the tester screen.
HINT: Refer to the intelligent tester operator's manual for further details.
Without Scan Tool
TOYOTA does not provide a procedure for Clearing Trouble Codes Without Scan Tool.
With Manufacturer's Scan Tool
DTC CHECK
HINT: When DTC B1150/23 is detected as a result of troubleshooting for "AIRBAG SYSTEM", perform troubleshooting for the occupant
classification system.
a. Check the DTCs.
1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Check the DTCs by following the prompts on the tester screen.
HINT: Refer to the intelligent tester operator's manual for further details.
Without Scan Tool
TOYOTA does not provide a procedure for Reading Trouble Codes Without Scan Tool.