Highlander 4WD V6-3.3L (3MZ-FE) Hybrid (2007)
4. SEPARATE OIL COOLER TUBE SUB-ASSEMBLY (w/Oil Cooler)
a. Separate the 2 oil cooler hoses from the oil cooler tubes.
b. Using SST and a wrench, separate the oil cooler tubes.
SST 09023-12701
c. Remove the bolt and oil cooler tube w/ bracket.
d. Remove the bolt and clamp, separate the oil cooler tubes.
5. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY
a. Remove the nut from the control shaft lever.
b. Using a screwdriver, disengage the 2 claws, disconnect the control cable with clip from the control cable bracket.
HINT: Tape up the screwdriver tip before use.
c. Remove the clip.