Highlander 4WD V6-3.5L (2GR-FE) (2008)
17. REMOVE FRONT NO. 1 CONSOLE BOX INSERT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
18. REMOVE FRONT NO. 2 CONSOLE BOX INSERT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
19. REMOVE YAW RATE AND ACCELERATION SENSOR
(a) Disconnect the connector from the yaw rate and acceleration sensor.
(b) Remove the 2 bolts and yaw rate and acceleration sensor.
NOTE: Do not remove the installation nuts.