Highlander 4WD V6-35L (2GR-FXE) Hybrid (2011) - Paint TSBs - Page 511
Warranty Information
APPLICABLE WARRANTY
^
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first,
from the vehicle's in-service date.
^
Warranty application is limited to occurrence of the specified condition described in this bulletin.
Required Tools & Equipment
Repair Procedure
1. Use the aluminum foil or damp cloth to cover plastic/rubber parts that are near the stain.
2. Apply heat to the stain using an infrared lamp or heat gun.
NOTICE
Apply heat for 5 - 10 minutes at 158°F - 176°F (70°C - 80°C). Do NOT allow the surface to become hotter than 176°F (80°C). Measure the
temperature with a thermometer.
3. After applying heat for 5 minutes examine the area to determine if the stain has been removed. If the stain still exists continue to apply heat and
re-examine the stain 5 minutes later.