Highlander 4WD V6-3.5L (2GR-FXE) Hybrid (2011)
Roof Rack Frame: Technical Service Bulletins
Body - Roof Rack Leg Cover Installation
T-SB-0235-10
August 9, 2010
Roof Rack Leg Cover Installation During PDS
Service Category
General
Section
Pre-Delivery Service
Market
USA
Applicability
Introduction
To prevent damage to the roof rack leg cover prior to installation of the crossbars the leg covers are not installed from the factory. Install the roof rack
leg covers according to the following procedure during Pre-Delivery Service (PDS) after the crossbars have been installed.
Warranty Information
Installation Procedure
For roof rack crossbar installation follow the installation instructions found on the Technical Information System (TIS).
The roof rack leg covers are stored in the vehicle's cargo area.
1. Install the right and left rear roof rack leg covers in the following sequence (labeled in Figure 1).