Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
Rear Bumper Cover / Fascia: Service and Repair
REPLACEMENT
1. REMOVE SPARE WHEEL COVER TRAY
2. REMOVE LUGGAGE COMPARTMENT TRAY
3. REMOVE REAR FLOOR FINISH PLATE
a. Remove the 4 clips.
b. Using a screwdriver, remove the rear floor finish plate.
HINT: Tape the screwdriver tip before use.
4. REMOVE QUARTER PANEL MUDGUARD SUB-ASSEMBLY REAR RH (W/ MUDGUARD)
a. Remove the 4 screws and quarter panel mudguard rear.
5. REMOVE QUARTER PANEL MUDGUARD SUB-ASSEMBLY REAR LH (W/ MUDGUARD)
6. REMOVE REAR BUMPER COVER
a. Remove the 2 clips.
b. Remove the 2 screws and clips.
c. Remove the 4 screws, 4 nuts.