Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
a. Align the markings, then install the wire harness with tape.
b. Install the roof headlining with the 4 clips.
44. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
a. Install the rear seat outer belt floor anchor with the bolt.
Torque: 42.0 N.m (420 kgf.cm, 31 ft.lbf)
45. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
46. INSTALL CENTER PILLAR GARNISH RH
a. Install the front seat outer belt shoulder anchor with the bolt.
Torque: 42.0 N.m (420 kgf.cm, 31 ft.lbf)
47. INSTALL CENTER PILLAR GARNISH LH