Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
e. Install and uniformly tighten the 10 bearing cap bolts, in several passes, in the sequence shown.
Torque: 16 Nm (163 kgf-cm, 12 ft. lbs.)
f.
Remove the service bolt.
e. Install and uniformly tighten the 10 bearing cap bolts, in several passes, in the sequence shown.
Torque: 16 Nm (163 kgf-cm, 12 ft. lbs.)
f.
Remove the service bolt.