Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
Drive Belt: Service and Repair
A/C Belt
V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
REPLACEMENT
1. REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1 [88310A]
a. Loosen the bolt C.
b. Loosen the bolt A.
c. Loosen the bolt B and remove the cooler V belt No.1.
2. INSTALL V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1 [88310A]
a. Temporarily install the cooler V belt No.1 as illustrated.
3. ADJUST V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1 [88310A]
Belt tension:
New belt: 165 ± 27 lbf
Used belt: 88 ± 22 lbf