Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
Torque: 8.0 N-m (82 kgf-cm, 71 in.-lbf)
16. INSTALL INTAKE AIR SURGE TANK
(a) Using an 8 mm hexagon wrench, install a new gasket and the air intake chamber assembly with the 2 bolts and 2 nuts. Uniformly tighten the
bolts and nuts in several passes.
Torque: 43 N-m (438 kgf-cm, 32 ft-lbf)
(b) Install the No.1 engine hanger with the 2 bolts.
Torque: 39 N-m (398 kgf-cm, 29 ft-lbf)
(c) Install the surge tank stay No.1 with the 2 bolts.
Torque: 20 N-m (199 kgf-cm, 14 ft-lbf)
(d) Install the 2 new gaskets and EGR pipe with the 4 nuts.
Torque: 12 N-m (120 kgf-cm, 9 ft-lbf)
17. INSTALL AIR CLEANER ASSEMBLY WITH HOSE
18. CONNECT VACUUM HOSE
19. INSTALL FRONT SUSPENSION UPPER BRACE CENTER (W/ FRONT SUSPENSION BRACE UPPER CENTER)
Torque: 80 N-m (816 kgf-cm, 59 ft-lbf)
20. INSTALL V-BANK COVER SUB-ASSY
21. ADD COOLANT
22. CHECK ENGINE COOLANT LEAK