Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
Blower Motor: Service and Repair
BLOWER ASSEMBLY
OVERHAUL
1. REMOVE GLOVE COMPARTMENT DOOR ASSY
2. REMOVE AIR DUCT NO.1
a. Remove the screw, disengage the 3 claw fittings and remove the air duct No.2.
3. SEPARATE ECM
a. Remove the 2 nuts and disconnect the ECM.
4. REMOVE AIR FILTER SUB-ASSY
a. Remove the cooler cover No.1.
b. Remove the air filter sub-assy.
5. REMOVE BLOWER ASSY
a. Disconnect the connector and clamp of the cooling unit motor w/fan sub-assy.
b. Disconnect the connector of the recirculation damper servo.
c. Remove the 2 screws and bracket.