Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
7. Connect SST to the connector of injector.
8. Connect SST (wire) to the battery for 15 seconds, and measure the injection volume with a graduated cylinder. Test each injector 2 or 3
time.
SST 09842-30070
NOTE: Always do the switching at the battery side.
If the injection volume is not as specified, replace the injector.
c. Inspect leakage
1. In the condition above, disconnect the test probes of SST (wire) from the battery and check the fuel leakage from the injector.
Fuel drop: 1 drop or less per 12 minutes