Landcruiser V8-4.7L (2UZ-FE) (2000)
Required Tools and Material:
^
Tacker
^
Tacks
^
Hog Ring Pliers
^
Adhesive Tape
NOTE:
Special Service Tools can be ordered through the Toyota SST Program by calling 1-800-933-8335.
Figure 1
How to use the Tacker:
As shown, drive in a tack pin with the tacker and fix the seat heater to the seat cover.
Repair Procedure
For the installation/removal of the seat and the disassembly/assembly of the seal cushion assembly, refer to the 2000 Land Cruiser Repair Manual (pages
BO-110 through 117).
Care should be taken during the operation to protect the seat cover from scratches, dirt or accidental cuts.
1.
Remove side of seat heater.
NOTE:
Do not heat the adhesive tape excessively. Heating the adhesive tape insufficiently may result in damage to the pad.