Landcruiser 4WD L6-3955cc 4.0L OHV (3F-E) (1988)
5. INSTALL WATER PUMP PULLEY, FLUID COUPLING, FAN AND ALTERNATOR DRIVE BELT
(a) Install fan to the fluid coupling.
(b) Place the fan shroud together with the fluid coupling in the position.
(c) Install the water pump pulley and fluid coupling with the four nuts.
(d) Place the drive belt onto each pulley.
(e) Stretch the belt tight and tighten the four nuts.
(f) Adjust the water pump drive belt tension.
6. INSTALL FAN SHROUD BOLTS
7. CONNECT RADIATOR INLET HOSE
8. CONNECT COOLANT RESERVOIR HOSE
9. INSTALL AND ADJUST PS DRIVE BELT
10. FILL WITH ENGINE COOLANT
11. START ENGINE AND CHECK FOR LEAKS