Landcruiser 4WD L6-3955cc 4.0L OHV (3F-E) (1988)
/Page-156002.png)
ASSEMBLY OF WATER PUMP
1. INSTALL WATER PUMP SEAT
(a) Using SST and a press, press the shaft of the bearing and install the pulley seat to a distance specified below from the water pump body edge.
SST 09236-00101 (09237-00010, 09237-00050)
Distance: 117.3 mm (4.618 in.)
(b) Install the stud bolts.
2. INSTALL WATER PUMP PLATE
Install a new gasket and the water pump plate with the three screws.
