toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Diagram Information and Instructions|Page 38 > < Diagram Information and Instructions|Page 36

Landcruiser 4WD L6-3955cc 4.0L OHV (3F-E) (1988)

Page 1
background image

Circuit Opening Relay: Testing and Inspection

INSPECTION OF CIRCUIT OPENING RELAY

1. INSPECT RELAY CONTINUITY.

a. Using an ohmmeter, check that there is continuity between terminals STA and E1.
b. Check that there is continuity between terminals B and FC.
c. Check that there is no continuity between terminals B and FP.

If continuity is not as specified, replace the relay.

2. INSPECT RELAY OPERATION.

a. Apply battery voltage across terminals STA and E1.
b. Using an ohmmeter, check that there is continuity between terminals B and FP.

Diagram Information and Instructions|Page 38 > < Diagram Information and Instructions|Page 36