Landcruiser 4WD L6-4.5L (1FZ-FE) (1993)
/Page-980001.png)
Brake Shoe: Service and Repair
Fig. 8 Exploded View Of Type 4 Drum Brake Assembly. Pickup & 4Runner 4WD
Fig. 9 Exploded View Of Type 4 Drum Brake Assembly. Land Cruiser
REMOVAL
1.
Raise and support rear of vehicle, then remove wheel and tire assembly.
2.
Remove brake drum. If brake drum cannot be removed easily, insert a suitable screwdriver through hole in backing plate, then push adjuster lever
away from adjuster and back of adjustment tension.
3.
Remove tension spring, using a suitable tool, then remove rear shoe hold-down spring and pin. Remove rear brake shoe and anchor spring, Fig. 8.
4.
On Land Cruiser models, remove front hold-down spring using a suitable tool, then disconnect the parking brake cable from the parking brake
bellcrank, Fig. 9.
5.
On Pickup, 4Runner and 4WD T100 models, remove front shoe hold-down spring and pin, using a suitable tool, then disconnect No. 1 parking
brake cable from No. 3 parking brake bellcrank.
6.
On 2WD T100 models, remove shoe hold-down spring, cups and pin, then adjusting lever spring. Remove adjuster with return spring, then using
pliers, disconnect parking brake cable from lever and remove rear shoe.
7.
On 2WD T100 models, remove E-ring, then automatic adjusting lever and C-washer, then parking brake lever. Disconnect brake line from wheel
