Landcruiser 4WD L6-4.5L (1FZ-FE) (1993)
(b) Remove the two bolts and disconnect the ground strap and engine wire.
8. REMOVE NO.2 AND NO.3 CYLINDER HEAD COVERS
Remove the four bolts and head covers.
9. DISCONNECT HIGH-TENSION CORDS FROM SPARK PLUGS
(a) Remove the two mounting bolts of the No.1 and No.2 cord clamps.
(b) Disconnect the high - tension cords at the rubber boot.Do Not pull on the cords.
NOTE: Pulling on or bending the cords may damage the conductor inside.
10.
REMOVE THROTTLE BODY
(a) Disconnect the throttle position sensor connector.
(b) Disconnect the lAG valve connector.