Alignment (Front): Service and Repair
- Make
- Toyota
- Model
- Landcruiser 4WD
- Engine
- L6-4.5L (1FZ-FE)
- Year
- 1993
- Section
- Alignment › Service and Repair › Front
MaintenanceFront · page 1 of 3
/Page-154001.png)
Alignment: Service and Repair
Front
Caster & Camber
Caster and camber are not adjustable on these models. If caster and camber
are not within limits, check for worn or damaged suspension parts and replace as necessary.
Toe-In
Measure length of tie rod on each side and adjust to be equal. Adjust toe-in by turning adjusting tubes equal amounts. Clamp adjusting tubes after
aligning clamps with tube slots. Lock tie rod ends so that inner and outer ends are at right angles to each other.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 1993 Toyota Landcruiser 4.5L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Toyota power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.