Landcruiser 4WD L6-4.5L (1FZ-FE) (1993)
Air Flow Meter/Sensor: Service and Repair
PROCEDURE
Removal
1. Disconnect negative terminal cable from battery.
2. Disconnect volume air flow meter connector and wire clamp.
3. Disconnect cruise control actuator cable.
4. Remove air cleaner cap, volume air flow meter and silencer.
-
Disconnect the air cleaner hose from the volume air flow meter.
-
Disconnect the No.2 air hose from the air injection reed valve.
-
Disconnect the three clamps, and remove the wing nut, air cleaner cap, volume air flow meter and silencer.
5. Remove volume air flow meter from air cleaner cap.
-
Remove the 4 nuts, plate washers, volume air flow meter. gasket and 4 collars.
-
Remove the 2 screws, bolt and bracket.
Installation
1. Install volume air flow meter to air cleaner cap.