Landcruiser 4WD L6-4.5L (1FZ-FE) (1993)
/Page-898009.png)
7. CONNECT TIE ROD TO KNUCKLE ARM
Torque the castle nut and secure it with a cotter pin.
Torque: 925 kg.cm. (67 ft.lb., 91 N.m.)
8. INSTALL OIL SEAL SET RETAINER TO KNUCKLE
Install the oil seal set retainer to steering knuckle with the six bolts.
9. INSTALL AXLE SHAFT
Position one flat part of the outer shaft upward, and install the shaft.
10. PACK MOLYBDENUM DISULPHIDE LITHIUM BASE GREASE
Pack molybdenum disulphide lithium base grease into the knuckle to about three fourths of the knuckle.
11. INSTALL KNUCKLE SPINDLE DUST COVER WITH NEW GASKETS AND DUST SEAL
