toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Recall - Replace Fuel Tank With Improved Design|Page 440 > < Recall - Replace Fuel Tank With Improved Design|Page 438
Page 18
background image

18. Reinstall spare wheel.

Torque: 340 kg.cm. (25 ft.lb., 33 N-m)

19. Reset the clock and, if the vehicle is equipped with a radio with electronic tuner, reprogram the preset radio stations.

Label Installation

F. SSC COMPLETION LABEL INSTALLATION PROCEDURE

1. After completing repair and before returning vehicle to the customer an SSC completion label that is enclosed in the owner's letter must be

affixed to the firewall (next to the brake booster. Make sure that the surface is clean and dry to ensure proper adhesion of the label.

2. The label is to be filled out as shown at left.

3. Additional SSC completion labels (P/N 00410-01917) may be ordered through the non-parts system on a 1450 order form or through the TDN

system.

Fuel Tank Replacement Procedure (For 2F Engine)

Removal of Fuel From Tank

Recall - Replace Fuel Tank With Improved Design|Page 440 > < Recall - Replace Fuel Tank With Improved Design|Page 438