Landcruiser AWD L6-4.5L (1FZ-FE) (1997)
Wheel Speed Sensor: Service and Repair
Rear
Rear Speed Sensor Components
REAR SPEED SENSOR
REMOVAL
NOTE: When replacing the sensor or sensor harness, replace the sensor and sensor harness together as a set.
Disconnect Speed Sensor Connector
1. Disconnect the Speed Sensor connector.
(a) Disconnect the speed sensor connector.
(b) Remove the 3 clamp bolts and 2 clips holding the sensor wire harness from the suspension arm and frame.
2. Remove Speed Sensor.
Remove the installation bolt and speed sensor from the axle end.
Torque: 18 Nm (13 ft. lbs.)
INSTALLATION
Installation is in the reverse order of removal.
NOTE: After installation, check Speed Sensor signal.