Landcruiser AWD V8-4.7L (2UZ-FE) (1998)
/Page-1121001.png)
Camshaft Position Sensor: Component Tests and General Diagnostics
INSPECT CAMSHAFT POSITION SENSOR
(a) Remove the V-bank cover
(b) Disconnect the camshaft position sensor connector.
(c) Using an ohmmeter, measure the resistance between terminals.
Resistance:
If the resistance is not as specified, replace the camshaft position sensor.
(d) Reconnect the camshaft position sensor connector
(e) Reinstall the V-bank cover.
