Matrix L4-1.8L (1ZZ-FE) (2008)
/Page-1459002.png)
If the result is not as specified, replace the door lock assembly.
2. INSPECT FRONT DOOR LOCK ASSEMBLY RH
(a) Apply battery voltage and inspect the door lock motor operation, as shown in the illustration and table.
Standard :
If the result is not as specified, replace the door lock assembly.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the door lock assembly.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance: