Matrix L4-1.8L (1ZZ-FE) (2008)
2. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
(a) Disconnect the parking brake switch connector from the parking brake switch.
(b) Remove the lock nut and adjusting nut from the parking brake cable assembly No. 1.
(c) Remove the 2 bolts.
(d) Using a screwdriver, raise the pick on the parking brake lever, and remove the parking brake cable assembly No. 1 from the parking brake
lever.
(e) Remove the parking brake lever from the body.
3. REMOVE PARKING BRAKE SWITCH ASSEMBLY
(a) Remove the screw and parking brake switch assembly.
4. REMOVE EXHAUST PIPE ASSEMBLY FRONT (See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Removal
)
5. REMOVE FRONT FLOOR HEAT INSULATOR NO. 1
(a) Remove the 3 nuts and front floor heat insulator No. 1.
6. REMOVE FRONT FLOOR HEAT INSULATOR NO. 2