Matrix L4-1.8L (1ZZ-FE) (2008)
(e) Mark the bolts with paint as shown in the illustration.
(f) Retighten the bolts 90° in the same sequence as procedure "A".
(g) Check that the paint marks of each bolt are at a 90° angle from the original position.
4. INSTALL CLUTCH DISC ASSEMBLY (for Manual Transaxle)
(a) Install the clutch disc assembly (See: Transmission and Drivetrain/Clutch/Service and Repair/Installation).
SST: 09301-00210
5. INSTALL CLUTCH COVER ASSEMBLY (for Manual Transaxle)
(a) Install the clutch cover assembly (See: Transmission and Drivetrain/Clutch/Service and Repair/Installation).
6. INSTALL MANUAL TRANSAXLE ASSEMBLY (for Manual Transaxle)
(a) Install the manual transaxle assembly (See: Transmission and Drivetrain/Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Installation).
7. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
(a) Install the automatic transaxle assembly (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal
and Replacement/Installation).