Matrix L4-1.8L (1ZZ-FE) (2008)
D.
Install the clamp of the engine wire.
E.
Connect the VSV connector.
7.
Fill and check the engine coolant. Refer to TIS:
^
2003 or 2004 model year Corolla Repair Manual, Engine/Hybrid System - Cooling - "Coolant: Replacement"
^
2005 model year Corolla Repair Manual, Engine/Hybrid System - Cooling - "Engine Coolant (1ZZ-FE): Replacement"
^
2006 or 2007 or 2008 model year Corolla Repair Manual, Engine/Hybrid System - Cooling - "1ZZ-FE Cooling: Coolant: On-Vehicle
Inspection"
8.
Clear the fuel trim values by disconnecting the negative (-) battery cable for 90 seconds.
9.
Test drive the vehicle and confirm normal operation.