Matrix L4-1.8L (1ZZ-FE) (2008)
-
The procedures listed below are for the LH side.
1. PRECAUTION
CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing (See: Air Bag Systems/Service Precautions).
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
3. REMOVE FRONT DOOR SCUFF PLATE LH (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal)
4. REMOVE REAR DOOR SCUFF PLATE LH (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal)
5. REMOVE FRONT DOOR OPENING TRIM LH
6. REMOVE REAR DOOR OPENING TRIM LH
7. REMOVE CENTER PILLAR GARNISH LOWER LH (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal)
8. REMOVE FRONT SEAT OUTER BELT ASSEMBLY (See: Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Outer Belt
Assembly/Removal)
9. REMOVE SIDE AIRBAG SENSOR LH
(a) Disconnect the connector from the side airbag sensor LH.
(b) Remove the nut and the side airbag sensor LH.
Installation
SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR:
COMPONENTS