Matrix L4-1.8L (1ZZ-FE) (2008)
Headlamp Dimmer Switch: Testing and Inspection
LIGHTING: HEADLIGHT DIMMER SWITCH:
INSPECTION
1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY
(a) Inspect light control switch continuity.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(b) Inspect headlight dimmer switch continuity.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
HINT: Turn light control switch to the HEAD position when checking "LOW BEAM" and "HI BEAM".
(c) Inspect turn signal switch continuity.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(d) w/ Fog light:
Inspect front fog light switch continuity.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance: