Matrix L4-1.8L (1ZZ-FE) (2008)
Camshaft Position Sensor: Testing and Inspection
1ZZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR:
INSPECTION
1. INSPECT CAMSHAFT POSITION SENSOR
(a) Using an ohmmeter, measure the resistance between the terminals.
Resistance:
At cold
835 to 1,400 Ohms
At hot
1,060 to 1,645 Ohms
NOTE: Cold and Hot mean the temperature of the coils themselves. Cold is from -10°C (14°F) to 50°C (122°F) and Hot is from 50°C (122°F)
to 100°C (212°F).
HINT: If the resistance is not as specified, replace the camshaft position sensor.