Matrix L4-1.8L (1ZZ-FE) (2008)
(a) Remove the clip and hole pin.
4. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY
(a) with Cruise control:
Disconnect the clutch switch assembly connector.
(b) Disconnect the clutch pedal switch assembly connector.
(c) Remove the 2 nuts, bolt and clutch pedal support assembly.
5. REMOVE CLUTCH PEDAL SUB-ASSEMBLY
(a) Remove the bolt and nut.
(b) Remove the clutch pedal sub-assembly from the clutch pedal support.
6. REMOVE CLUTCH PEDAL PAD
7. REMOVE CLUTCH PEDAL BUSH
(a) Remove the 2 bushes from the clutch pedal.
8. REMOVE NO. 1 CLUTCH PEDAL CUSHION
(a) Using needle-nose pliers, remove the No. 1 cushion from the clutch pedal.
9. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH