Matrix L4-1.8L (1ZZ-FE) (2008)
(a) Apply MP grease to inside of a new clevis bush.
(b) Install the clevis bush to the clutch pedal.
HINT: Install the clevis bush from the right side of the vehicle.
2. INSTALL NO. 1 CLUTCH PEDAL CUSHION
(a) Using needle-nose pliers, install the No. 1 cushion to the clutch pedal.
3. INSTALL CLUTCH PEDAL BUSH
(a) Apply MP grease to both side of 2 new bushes.
(b) Install the 2 bushes to the clutch pedal.
4. INSTALL CLUTCH PEDAL PAD
5. INSTALL CLUTCH PEDAL SUB-ASSEMBLY
(a) Install the clutch pedal sub-assembly to the clutch pedal support with the bolt and nut.
Torque: 37 Nm (375 kgf-cm, 27 ft-lbf)
HINT: Install the bolt from the right side of the vehicle.
6. INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY
(a) Install the clutch pedal support to the vehicle with the 2 nuts and bolt.
Bolt - Torque: 19 Nm (195 kgf-cm, 14 ft-lbf)
Nut - Torque: 12 Nm (120 kgf-cm, 9 ft-lbf)